Swimming pool technology

The following control steps must be carried out during the daily inspection of the bath system:Checking the containers and their fill levelDocumentation when changing containersConsumption of flocculant by means of markingChecking and cleaning the hair and fibre trapsChecking and cleaning the pre-filtersChecking the automatic measuring and control systems and the flow rateDocumentation of fresh water additionChecking the REDOX valueChecking the filter differential pressureChecking the filter backwash according to the planChecking chemical consumption for filter disinfectionRegular inspection of empty containers and system faultsFor comprehensive training on the subject of pool hygiene, please contact our partner W.H.U. GmbH: Bodenlehenstr. 15 | 5500 Bischofshofen | AUSTRIAPhone:+43 6462 32852| E-Mail: office@whu-lab.at

The following control steps must be carried out during the weekly maintenance of the pool system:Carrying out the filter backwash (based on the backwash schedule, the filter differential pressure or the water values)Checking with automatic filter backwashingDocumentation and entry in the operating log of the operating hours of the environmental pumpsChecking the fill level and level of the material surface of the filter materialCleaning the hair and fibre trapsChecking the personal protective equipment (PPE)The following checks must be carried out during the monthly maintenance of the bath system:Checking the filter bed expansion during filter backwashingObservation of the filter backwash with automatic backwash programmeInspection of lifting systemsHot tubs (including equalising tubs if only hot tubs are supplied by this circuit) must be cleaned and disinfectedevery three months .The following inspection steps must be carried out during the annual maintenance of the pool system:Pool draining incl. pool cleaningDisinfection of indoor and outdoor poolsCleaning of equalising poolsTop up the filter filling (if required)Checking the safety equipment (e.g. chlorine gas warning device, level switch-off)Commissioning a specialist company to maintain the entire systems, including chemical dosing systems, measuring and control systems and automatic switching devicesFor comprehensive training on the subject of pool hygiene, please contact our partner, W.H.U. GmbH: Bodenlehenstr. 15 | 5500 Bischofshofen | AUSTRIAPhone:+43 6462 32852| E-Mail: office@whu-lab.at

The following checks must be carried out before guests arrive:Check the access restrictionsMeasurement of chlorine content and pH value and entry in the operating logbookChecking the pool temperature and taking possible corrective measuresCheck the pools and pool edges for soilingVisual inspection of the suction pointsRemoval and cleaning of the pool vacuum cleaner if necessaryCheck that the channel switch has been reset after morning cleaningChecking that chairs and loungers are positioned according to set standardsEnsuring the integrity and slip resistance of surfacesElimination of potential tripping hazardsEnsuring clear escape routesChecking the handrailsVisual inspection and cleaning of pool overflowsVisual or application control of slidesFor comprehensive training on the subject of pool hygiene, please contact our partner, W.H.U. GmbH: Bodenlehenstr. 15 | 5500 Bischofshofen | AUSTRIAPhone:+43 6462 32852| E-Mail: office@whu-lab.at

The following checks must be carried out before guests arrive:Removal of disinfectants from the previous evening by sponging with water or using a machineEmptying and cleaning of all wading, treading and pub pools in the eveningUnhooking and emptying of water hosesCleaning and disinfecting cleaning matsChecking the bathing area for objects left behindCleaning the pools as assigned by the companyMechanical cleaning of the floor of the outdoor pool once a dayMechanical cleaning of the floor of the indoor pool three times a weekWeekly cleaning of the whirlpoolCleaning of the whirlpool pool walls in case of black edges or coating filmDaily cleaning of the area around the water surface for pools without an overflow channelMonthly cleaning of the overflow channelFor comprehensive training on the subject of pool hygiene, please contact our partner, W.H.U. GmbH: Bodenlehenstr. 15 | 5500 Bischofshofen | AUSTRIAPhone:+43 6462 32852| E-Mail: office@whu-lab.at

The following control steps must be carried out during bathing:Check the floor and dry as necessary using a drying mop, machine or water slideRegular measurement and entry of the chlorine content in the operating logbookIntervention in the event of breaches of the pool rulesFirst aid in the event of accidentsResponding to water contamination or other incidents in accordance with work instructionsFor comprehensive training on the subject of pool hygiene, please contact our partner, W.H.U. GmbH: Bodenlehenstr. 15 | 5500 Bischofshofen | AUSTRIAPhone:+43 6462 32852| E-Mail: office@whu-lab.at

The following control steps must be carried out during the daily inspection of the bath system:Checking the containers and their fill levelDocumentation when changing containersConsumption of flocculant by means of markingChecking and cleaning the hair and fibre trapsChecking and cleaning the pre-filtersChecking the automatic measuring and control systems and the flow rateDocumentation of fresh water additionChecking the REDOX valueChecking the filter differential pressureChecking the filter backwash according to the planChecking chemical consumption for filter disinfectionRegular inspection of empty containers and system faults

The following control steps must be carried out during weekly maintenance of the pool system:Carrying out filter backwashing (based on the backwash schedule, filter differential pressure or water values)Control with automatic filter backwashingDocumentation and entry in the operating diary of the operating hours of the environmental pumpsChecking the filling height and level of the material surface of the filter materialCleaning the hair and fiber catchersChecking personal protective equipment (PPE)The following control steps must be carried out during monthly maintenance of the pool system:Control of filter bed expansion during filter backwashingObservation of filter backwashing during automatic backwashing programInspection of lifting systemsHot whirlpool pools (including compensation pools, if this circuit only supplies hot whirlpool pools) must be cleaned and disinfected quarterly.The following control steps must be carried out during the annual maintenance of the pool system:Pool emptying including pool cleaningDisinfection of indoor and outdoor poolsCleaning of compensation tanksSupplementing the filter filling (if necessary)Checking the safety devices (e.g. chlorine gas warning device, level switch-off)Commissioning a specialist company to maintain the entire system including chemical dosing systems, measuring and control systems as well as automatic switching devicesFor extensive training on the topic of pool hygiene, contact our partner, W.H.U. GmbH:Bodenlehenstr. 15 | 5500 Bischofshofen | AUSTRIATelephone:+43 6462 32852| ​Email: office@whu-lab.at

The following control steps must be carried out before guests arrive:Control of access restrictionsMeasurement of chlorine content and pH value and entry in the operations logCheck pool temperature and take possible corrective actionCheck the pools and pool edges for dirtVisual inspection of the suction pointsIf necessary, remove and clean the pool vacuumChecking the reset of the gutter switch after morning cleaningDetermining whether chairs and loungers are positioned according to established standardsPay attention to the integrity and slip resistance of covering surfacesElimination of potential tripping hazardsEnsuring clear escape routesChecking the handrailsVisual inspection and cleaning of the pool overflowsVisual or application inspection of slidesFor extensive training on the topic of pool hygiene, contact our partner, W.H.U. GmbH:Bodenlehenstr. 15 | 5500 Bischofshofen | AUSTRIATelephone:+43 6462 32852| ​Email: office@whu-lab.at

The following checks must be carried out before guests arrive:Removal of disinfectants from the previous evening by sponging with water or using a machineEmptying and cleaning of all wading, treading and pub pools in the eveningUnhooking and emptying of water hosesCleaning and disinfecting cleaning matsChecking the bathing area for objects left behindCleaning the pools as assigned by the companyMechanical cleaning of the floor of the outdoor pool once a dayMechanical cleaning of the floor of the indoor pool three times a weekWeekly cleaning of the whirlpoolCleaning of the whirlpool pool walls in the event of black edges or coating filmDaily cleaning of the area around the water surface for pools without an overflow channelMonthly cleaning of the overflow channel

The following control steps must be carried out during bathing:Check the floor and dry as necessary using a drying mop, machine or water slideRegular measurement and entry of the chlorine content in the operating logbookIntervention in the event of breaches of the pool rulesFirst aid in the event of accidentsResponding to water contamination or other incidents in accordance with work instructions